12/16/2023 0 Comments Camo ex camouflage world of warshipsOnce this was completed, the hull was just a mass of triangular shapes. I did the same for the stern deck and turrets, and also the center deck. With a soft pencil I then joined the lines from top edge of the hull to waterline, following the design on the instructions. First, I taped the bow deck to the hull so that I could line up markings on the front turrets. The deck consisted of three pieces.bow, stern and center deck. I simply counted the portholes on the pictures, then counted the portholes on the hull, and marked both top edge of hull and at waterline. The portholes in the pictures lined up perfectly with the hull. I used four colors, Dark Sea Grey, Dark Grey, Light Grey and Flat White. The instruction book had pictures of the both starboard and port sides and the colors. The hull was then sanded lightly with 320 paper just to take the sheen off the plastic. ![]() 17 at the bow and 38 at the stern, on both sides, which I drilled out. It has “dimples” along the sides of the hull for portholes.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |